7-Bus System (Glover's Book 1st Test Case)

I. Introduction:

\(\bullet\) This is the first 7 Bus Test Case that is taken from the text book of Glover et al. [1].
\(\bullet\) It is modeled under 100 MVA base, and bus 7 is considered as a swing bus.
\(\bullet\) All the required data are available in III.
\(\bullet\) The system summary is as follows:

II. Single-Line Diagram:

\(\bullet\) The single-line diagrams of the proposed system - as taken from PowerWorld Simulator (under editing and contouring modes) - are shown below:

III. Files:

\(\bullet\) Full System Data (Excel CSV Format)  [Download]
\(\bullet\) Solution Details (TEXT, M-File and Excel CSV Formats) [Download]
\(\bullet\) PowerWorld Simulator (v. 18) [Download]

IV. Citation Policy:

If you publish material based on databases obtained from this repository, then, in your acknowledgments, please note the assistance you received by using this repository. This will help others to obtain the same data sets and replicate your experiments. We suggest the following pseudo-APA reference format for referring to this repository:

Ali R. Al-Roomi (2015). Power Flow Test Systems Repository [https://al-roomi.org/power-flow]. Halifax, Nova Scotia, Canada: Dalhousie University, Electrical and Computer Engineering.

Here is a BiBTeX citation as well:

@MISC{Al-Roomi2015,
author = {Ali R. Al-Roomi},
title = {{Power Flow Test Systems Repository}},
year = {2015},
address = {Halifax, Nova Scotia, Canada},
institution = {Dalhousie University, Electrical and Computer Engineering},
url = {https://al-roomi.org/power-flow}
}

V. References:

[1] J. D. Glover, M. S. Sarma, and T. J. Overbye, Power System Analysis and Design, 5th ed. Stamford, CT: Cengage Learning, 2012.